MaxQ Data Point Forum Index MaxQ Data Point
Supporting the MaxQData User Community
 
 MaxQData Home Page | MaxQData Wiki
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Video overlay is jumpy

 
Post new topic   Reply to topic    MaxQ Data Point Forum Index -> VeQtr Systems and Video Features
View previous topic :: View next topic  
Author Message
glagola1



Joined: 12 Mar 2009
Posts: 6

PostPosted: Thu Mar 12, 2009 7:04 am    Post subject: Video overlay is jumpy Reply with quote

I'm wondering why the video overlay that chart creates is jumpy. I've tried different bit rate settings but it produces only a more clear jumpy video. Smile

Any ideas here?

Thanks,

Matt
Back to top
View user's profile Send private message
naschmitz



Joined: 10 Jun 2008
Posts: 39
Location: Salem, NH

PostPosted: Fri Mar 13, 2009 7:34 am    Post subject: Reply with quote

When you say the "video overlay that chart creates is jumpy" do you mean the whole video is jumpy or just the overlay is jumpy?

Are you capturing video using Flight or using an existing video and using Chart to create and merge the overlay?

Are you using a trial version or an unlocked version?
Back to top
View user's profile Send private message
glagola1



Joined: 12 Mar 2009
Posts: 6

PostPosted: Mon Mar 16, 2009 10:47 am    Post subject: Reply with quote

What I mean is that the FPS is really, really low. Like maybe 4 FPS or something. Also, the audio is not in sync with the video.

Any fixes for this?
Back to top
View user's profile Send private message
naschmitz



Joined: 10 Jun 2008
Posts: 39
Location: Salem, NH

PostPosted: Mon Mar 16, 2009 11:48 am    Post subject: Reply with quote

glagola1 wrote:
What I mean is that the FPS is really, really low. Like maybe 4 FPS or something. Also, the audio is not in sync with the video.

Any fixes for this?


Sounds like you are using the demo version and not the paid unlocked version. It should look like this: http://www.vimeo.com/3303746 or this: http://www.vimeo.com/3303219

Bert
Back to top
View user's profile Send private message
glagola1



Joined: 12 Mar 2009
Posts: 6

PostPosted: Mon Mar 16, 2009 12:14 pm    Post subject: Reply with quote

That's it. I was using my work computer to create the overlay and it's software is not unlocked. Oversight on my part....

Thanks!


Last edited by glagola1 on Mon Mar 16, 2009 12:17 pm; edited 1 time in total
Back to top
View user's profile Send private message
naschmitz



Joined: 10 Jun 2008
Posts: 39
Location: Salem, NH

PostPosted: Mon Mar 16, 2009 12:17 pm    Post subject: Reply with quote

Hi Matt,

Which netbook and webcams are you using? If you got a turnkey system from MaxQ, you are right, it should be unlocked already.

Bert
Back to top
View user's profile Send private message
glagola1



Joined: 12 Mar 2009
Posts: 6

PostPosted: Mon Mar 16, 2009 12:18 pm    Post subject: Reply with quote

see edit.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    MaxQ Data Point Forum Index -> VeQtr Systems and Video Features All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Contents © Copyright 2006 MaxQData, LLC
Powered by phpBB © 2001, 2005 phpBB Group

Anti Bot Question MOD - phpBB MOD against Spam Bots
Blocked registrations / posts: 113939 / 3512