MaxQ Data Point

sachilles · Joined: 25 Nov 2006 Posts: 13 Location: Central Vermont

just bought the video overlay upgrade (diy).
I just tried to do the overlay, and it prompted me to buy an upgrade for prism, as it said I didn't have access to the command line.
Source video is asf which the manual said doesn't need any converting anyway.
So now it doesn't do the overlay.....any advice on how to fix this?
_________________
sachilles
61 Morris Mini
02 Subaru WRX wagon
97 Audi 1.8tq

KevinDietz · Joined: 19 Oct 2006 Posts: 52 Location: Federal Way

sorry for the delay in answering I'll run this question by Ed.
_________________
"How to Make your car Faster"
1. Bigger Tires
2. Bigger Engine
3. Bigger Brakes
4. or just give me the keys!

Ed · Posted: Tue Aug 04, 2009 9:12 am Post subject:

As mentioned on the Download page, Prism is free and is available for download from the publisher here:

http://www.nchsoftware.com/prism/index.html
_________________
Ed Lansinger
MaxQData, LLC

sachilles · Joined: 25 Nov 2006 Posts: 13 Location: Central Vermont

Ed, I'm a little late on responding, as I found a work around.

Prism is free to download. After 30 days, it prompts for an upgrade. Prism is still usable in manual mode. However, it says it needs the upgrade in order for the command your software gives it to work.

My work around was to uninstall then re-install prism.

Not entirely sure why it needs prizm if the file was asf to begin with.
_________________
sachilles
61 Morris Mini
02 Subaru WRX wagon
97 Audi 1.8tq